LA VIE QUOTIDIENNE > Fauteuils roulants
la 5ième roue du carrosse...
zil1000h:
Salut,
loin de moi de vouloir faire remonter un sujet sans raison mais...:
Les pavés Parisiens ont eu raison des réglages de ma freewheel (la roue a du mal à rester dans l axe qd je roule)
et j ai trouvé le manuel technique expliquant le réglage malheur pour moi il est dans la langue de l'Anglais... donc si qq1 maîtrise plus que moi ( ça devrait pas être compliqué) cette langue... merci
If your Freewheel is not tracking straight when coasting forward on level ground, the
steering should be adjusted. To do this you need to adjust two separate fasteners:
Front Set Screw, and;
Main Steering Stem Bolt
1. The Front Set Screw holds the steering adjustment.
2. After loosening the Front Set Screw (3/32" allen or 2.5mm allen wrench) and Main
Steering Stem Bolt, rotate the fork to adjust the steering straight..
3. If the internal bushing is not rotating relative to the frame, then tighten the ball adjuster knob to lock the fork to the internal bushing. Work the bushing loose from the
frame. I like to re-grease this joint to keep it from binding.
4. Set the steering and then tighten the Front Set Screw.
5. Finish by tightening the Main Steering Stem Bolt.
6. Test for straightness by coasting on a flat surface.
Note: The front ball adjuster knob can be backed off for light steering action or screwed
in for heavier steering action
Micka:
Coucou,
si tu as une 3éme roue tu pourras au moins te promener plus souvent pas de l'athlé c'est sur mais au moins tu auras une meilleur roule que sur 4 roues...!
à trés bientôt
Handie:
...
Micka:
bonjour,
Pour faire une 3éme roue sur mesure sur un traveler pas de probleme si on a son numéto de série car les potences sont standard soit droite soit en V avec toujours le même angle.
donc le numéro nous suffit
bonne fin de journée
A quand le retour du sport Handie??? ;)
micka
Handie:
...
Navigation
[#] Page suivante
[*] Page précédente
Utiliser la version classique